Repair fuel injector steps

Repair injector steps, injector gasket manufacturers for you to introduce it:

Step 1: test the injector on the test bed to see the test results.

Step 2: prepare gaskets of different thickness according to the proper range of armature lift (such as 45-55 micron).

Step 3: remove solenoid valve, simply measure armature lift, thicken or thin armature lift gasket thickness.

Step 4: test on the test bench to see if the test results are normal.

Step 5: if it is abnormal, replace the gasket and test on the test bench to see whether the test result is normal.

Step 6: if it is abnormal, continue to replace the gasket and test on the test bench to see whether the test result is normal.

Step 7: until the test result of the test bench is normal.