Five things to watch out for when using high pressure tubing

Five things to note when using high pressure tubing:

High pressure tubing and tubing assembly shall only be used within its bearing capacity and shall not be used under pressure exceeding the designed working pressure.

High pressure oil pipe and oil pipe assembly should not be used under the small bending radius of the high pressure oil pipe, and try to avoid bending or bending near the pipe joint, otherwise it will hinder the hydraulic transmission and transmission of materials or damage the high pressure oil pipe assembly.

The medium temperature transmitted by the high-pressure oil pipe and the oil pipe assembly shall not exceed -40 c to 120 c, or its service life will be shortened.

Iv. The high-pressure oil pipe and the tubing assembly shall be handled with care in transportation, and shall not be dragged or dragged on sharp or rough ground, nor shall the high-pressure oil pipe be bent or compressed.

The high-pressure oil pipe and the oil pipe assembly shall be kept clean and cleaned to prevent foreign bodies from entering and damaging the equipment.